Provide PDF Format
AASHTO M 284M/M 284-09
- Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements (ASTM Designation: A 775/A 775M-07b)
- standard by American Association of State and Highway Transportation Officials, 2009
- Publisher: AASHTO
$66.00$131.00
AASHTO M 284M/M 284-09 is identical to ASTM A 775/A 775M-07b except for the followingprovision:
1. Add the following to the last sentence of ASTM A 775/A 775M-07b Section 11.4:The coating thickness after curing on sheared or cut ends shall be 175 to 450 μm(7 to 18 mils). The patching material used to repair the sheared or cut ends shall not extendbeyond 75 mm (3 in.) from the sheared or cut end.
This specification covers deformed and plain steelreinforcing bars with protective epoxy coating applied by theelectrostatic spray method.
1. Add the following to the last sentence of ASTM A 775/A 775M-07b Section 11.4:The coating thickness after curing on sheared or cut ends shall be 175 to 450 μm(7 to 18 mils). The patching material used to repair the sheared or cut ends shall not extendbeyond 75 mm (3 in.) from the sheared or cut end.
This specification covers deformed and plain steelreinforcing bars with protective epoxy coating applied by theelectrostatic spray method.
Related Products
AASHTO GHC-4
AASHTO Guide Specifications for Horizontally Curved Steel Girder Highway Bridges with Design Example..
$45.00 $90.00
AASHTO TP 119-15
Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resis..
$34.00 $68.00
AASHTO T 308-10 (2015)
Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the I..
$30.00 $60.00