Provide PDF Format
AASHTO M 285M/M 285-11 (2015)
- Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service (ASTM Designation: A 744/A 744M-10)
- standard by American Association of State and Highway Transportation Officials, 2011
- Publisher: AASHTO
$21.00$42.00
This specification covers iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.
This specification requires postweld heat treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to M 163M/M 163.
Note 1 - For general corrosion-resistant alloy castings, reference should be made to M 163M/M 163. For general heat-resistant alloy castings, reference should be made to ASTM A 297/A 297M. For nickel-base alloy castings, refer to ASTM A 494/A494M.
This specification requires postweld heat treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to M 163M/M 163.
Note 1 - For general corrosion-resistant alloy castings, reference should be made to M 163M/M 163. For general heat-resistant alloy castings, reference should be made to ASTM A 297/A 297M. For nickel-base alloy castings, refer to ASTM A 494/A494M.
Related Products
AASHTO T 50-09
Standard Method of Test for Float Test for Bituminous Materials (ASTM Designation: D 139-07)..
$6.00 $12.00
AASHTO T 49-07 (2011)
Standard Method of Test for Penetration of Bituminous Materials (ASTM D 5-06)..
$6.00 $12.00
AASHTO T 240-06
Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Ov..
$60.00 $120.00
AASHTO MP 14-12
Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems..
$32.00 $63.00