Provide PDF Format
AASHTO PP 55-06 (2012)
- Standard Practice for Overcoating Field Test Program for Evaluating Protective Coatings on Existing Bridges or Salvaged Beams
- standard by American Association of State and Highway Transportation Officials, 2009
- Publisher: AASHTO
$22.00$44.00
This field testing program has been established to provide the end user with test results which can be used to make performance judgments on one-, two-, or three-coat systems for maintenance overcoating previously painted steel structures.
This field testing program is intended to apply to maintenance overcoating, herein defined as the practice of cleaning and painting over an existing coating which is largely intact but has areas of corrosion or peeling paint in need of repair. This practice usually includes the spot preparation of rusted or degraded areas, feathering edges of existing paint, power washing the entire structure, priming bare or repaired areas, applying an intermediate coat over the repaired areas or entire structure, and the optional step of applying a full topcoat over the entire structure, or a similar variation of these procedures.
This field testing program evaluates the performance of protective coatings applied to existing painted steel surfaces with various degrees of surface preparation and condition, including, surfaces hand tool cleaned (SSPC SP 2), surfaces cleaned by conventional power tools (SSPC SP 3), surfaces power tool cleaned to bare metal (SSPC SP 15), and industrial blast (SSPC SP 14).
The coating materials in the field testing program are applied to previously painted steel surfaces of existing bridges or salvaged bridge beams after proper surface preparations, as described herein, and thereafter evaluated annually, unless otherwise agreed, for a period of three years.
All of the elements of this field testing program shall be performed in accordance with applicable local, state, and national regulations governing environmental and worker protection. Specific references to material, environmental, and worker protection requirements are not necessarily made in this document since these regulations are widely known and compliance with these regulations is standard practice in the bridge painting industry.
This field testing program is intended to apply to maintenance overcoating, herein defined as the practice of cleaning and painting over an existing coating which is largely intact but has areas of corrosion or peeling paint in need of repair. This practice usually includes the spot preparation of rusted or degraded areas, feathering edges of existing paint, power washing the entire structure, priming bare or repaired areas, applying an intermediate coat over the repaired areas or entire structure, and the optional step of applying a full topcoat over the entire structure, or a similar variation of these procedures.
This field testing program evaluates the performance of protective coatings applied to existing painted steel surfaces with various degrees of surface preparation and condition, including, surfaces hand tool cleaned (SSPC SP 2), surfaces cleaned by conventional power tools (SSPC SP 3), surfaces power tool cleaned to bare metal (SSPC SP 15), and industrial blast (SSPC SP 14).
The coating materials in the field testing program are applied to previously painted steel surfaces of existing bridges or salvaged bridge beams after proper surface preparations, as described herein, and thereafter evaluated annually, unless otherwise agreed, for a period of three years.
All of the elements of this field testing program shall be performed in accordance with applicable local, state, and national regulations governing environmental and worker protection. Specific references to material, environmental, and worker protection requirements are not necessarily made in this document since these regulations are widely known and compliance with these regulations is standard practice in the bridge painting industry.
Related Products
AASHTO M 114-07
Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)..
$6.00 $12.00
AASHTO MP 13M/MP 13-04 (2006)
Standard Specification for Stainless Clad Deformed and Plain Round Steel Bars for Concrete Reinforce..
$25.00 $50.00
AASHTO M 278-02 (R2011)
Standard Specification for Class PS46 Poly(Vinyl Chloride) (PVC) Pipe..
$20.00 $40.00
AASHTO T 65M/T 65-06
Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Al..
$20.00 $40.00