Provide PDF Format
AASHTO TP 75-08
- Standard Method of Test for Air-Void Characteristics of Freshly Mixed Concrete by Buoyancy Change
- standard by American Association of State and Highway Transportation Officials, 08/01/2008
- Publisher: AASHTO
$25.00$50.00
This test method covers the determination of characteristics of the air-void system of fresh concrete using a sample of mortar. Spacing factor, specific surface, and entrained air content are determined by capturing air bubbles released from a mortar sample.
The sample will only be representative of the depth of the concrete within approximately 60 mm (2.5 in.) below the level at which the sampling is begun. This method is applicable to fresh concrete with a minimum slump of 10 mm (0.4 in.) and air content between 3.5 and 10 percent by volume. Only air voids less than 3 mm (0.1 in.) in diameter are measured by this method. The test must be performed in sheltered, stable conditions.
The sample will only be representative of the depth of the concrete within approximately 60 mm (2.5 in.) below the level at which the sampling is begun. This method is applicable to fresh concrete with a minimum slump of 10 mm (0.4 in.) and air content between 3.5 and 10 percent by volume. Only air voids less than 3 mm (0.1 in.) in diameter are measured by this method. The test must be performed in sheltered, stable conditions.
Related Products
AASHTO GPF-1
AASHTO Guide for the Planning, Design, and Operation of Pedestrian Facilities, 1st Edition..
$56.00 $111.00
AASHTO T 276-97 (2005)
Standard Method of Test for Developing Early-Age Compression Test Values and Projecting Later-Age St..
$60.00 $120.00
AASHTO T 281-06 (2010)
Standard Method of Test for Vitrified Clay Pipe (ASTM C 301-04)..
$25.00 $50.00
AASHTO M 170M-15
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] (ASTM D..
$24.00 $48.00