ASTM A203/A203M-97(2007)e1
- Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
- standard by ASTM International, 11/01/2007
- Publisher: ASTM
$22.00$43.20
1.1 This specification covers nickel-alloy steel plates intended primarily for welded pressure vessels.
1.2 Plates under this specification are available with four strength levels and two nickel compositions as follows:
| Grade | Nominal Nickel Content % | Yield Strength, min, ksi [MPa] | Tensile Strength, min, ksi [MPa] |
| A | 2.25 | 37 [255] | 65 [450] |
| B | 2.25 | 40 [275] | 70 [485] |
| D | 3.50 | 37 [255] | 65 [450] |
| E | 3.50 | 40 [275] | 70 [485] |
| F | 3.50 | ||
| 2 in. [50 mm] and under | 55 [380] | 80 [550] cccc | |
| Over 2 in. [50 mm] | 50 [345] | 75 [515] | |
1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. However, current practice normally limits the maximum thickness of plates furnished under this specification as follows:
| Grade | Maximum Thickness, in. [mm] |
| A | 6 [150] |
| B | 6 [150] |
| D | 4 [100] |
| E | 4 [100] |
| F | 4 [100] |
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents. Therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
Related Products
ASTM D4601-98
Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing..
$23.00 $46.80
ASTM D7336/D7336M-16
Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials..
$22.00 $44.00
ASTM D7782-13
Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection ..
$25.00 $50.00
ASTM D5830-95(2001)
Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography..
$26.00 $52.80