Provide PDF Format
ASTM A312/A312M-13a
- Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- standard by ASTM International, 05/01/2013
- Publisher: ASTM
$30.00$60.00
Note 1-When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C].
Related Products
ASTM A667/A667M-87(2008)
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders..
$23.00 $46.80
ASTM D6341-16
Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lu..
$22.00 $44.00
ASTM E307-72(2014)
Standard Test Method for Normal Spectral Emittance at Elevated Temperatures..
$22.00 $44.00
