Provide PDF Format
ASTM ADJD225505C
- Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 5-79 (Combination product -- adjunct plus standard)
- DEVICE / CHART by ASTM International,
- Publisher: ASTM
$65.00$130.00
This combination product includes both the adjunct (ADJD225506) and a copy of D 2255.
Series 5-79 -- This adjunct includes photographs for Yarn Number Range 50s/1 to 75s/1 (12 to 8 Tex)
A series of photographic prints representing four appearance grades - A, B, C, and D in six ranges of yarn numbers. Grade A is the highest and the others are progressively lower.
The appearance grades are based on composite evaluations of several factors, including yarn evenness, fuzziness, and neppiness. For ease in comparison grading, the same yarn is used for all grades in a series. A near mid-range size was selected to represent equal steps between adjacent grades using yarns produced with current commercial manufacturing equipment and practices. The use of offset printing provides better yarn definition and uniformity from set to set.
Each photograph is 6 inches x 10 inches in size and the four photographs representing Grades A to D of each series are mounted on a 27.5 inches x 15 inches extra heavy board.
Series 5-79 -- This adjunct includes photographs for Yarn Number Range 50s/1 to 75s/1 (12 to 8 Tex)
A series of photographic prints representing four appearance grades - A, B, C, and D in six ranges of yarn numbers. Grade A is the highest and the others are progressively lower.
The appearance grades are based on composite evaluations of several factors, including yarn evenness, fuzziness, and neppiness. For ease in comparison grading, the same yarn is used for all grades in a series. A near mid-range size was selected to represent equal steps between adjacent grades using yarns produced with current commercial manufacturing equipment and practices. The use of offset printing provides better yarn definition and uniformity from set to set.
Each photograph is 6 inches x 10 inches in size and the four photographs representing Grades A to D of each series are mounted on a 27.5 inches x 15 inches extra heavy board.
Related Products
ASTM A761/A761M-13a
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe,..
$26.00 $52.80
ASTM D3681-96
Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Therm..
$26.00 $52.80
ASTM D2517-06(2011)
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings ..
$22.00 $44.00
