ASTM D858-07
- Standard Test Methods for Manganese in Water
- standard by ASTM International, 08/01/2007
- Publisher: ASTM
$26.00$52.80
1.1 These test methods cover the atomic absorption determination of dissolved and total recoverable manganese in water and certain wastewaters. Three test methods are given as follows:
Test Method | Concentration Range | Sections |
A-Atomic Absorption, Direct | 0.1 to 5 mg/L | 7 to 15 |
B-Atomic Absorption, Chelation-Extraction | 10 to 500 g/L | 16 to 24 |
C-Atomic Absorption, Graphite Furnace | 5 to 50 g/L | 25 to 33 |
1.2 Test Methods A, B, and C were used successfully on reagent grade and natural waters. Other matrices used in the study were brine (Test Method B), effluent from a wood treatment plant, and condensate from a medium BTU coal gasification process (Test Method C). It is the user's responsibility to ensure the validity of a test method for waters of untested matrices.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3 Former Test Method A (Colorimetric) was discontinued. For historical information, see Appendix X1.
Related Products
ASTM D4028/D4028M-13
Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn..
$22.00 $44.00
ASTM D2700-09e1
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel..
$43.00 $85.20
ASTM D6337-98(2013)
Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics..
$22.00 $44.00
ASTM C584-81(1999)
Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products..
$23.00 $46.80