Provide PDF Format
AWWA WQTC69278
- Philadelphia's Use of Eclox for Water Contamination Response
- Conference Proceeding by American Water Works Association, 11/01/2008
- Publisher: AWWA
$12.00$24.00
The Philadelphia Water Department has been developing its toolbox for response topotential contamination, and has evaluated the use of the Eclox test kit to: establish a baseline for source water andfinished water; detect specific contaminants; and, report reliable and reproducible results.Baseline toxicity studies were completed for Philadelphia's intakes and finished waters from three water treatmentplants. De-ionized water samples spiked with various contaminants at different concentrations were also tested.Quality control samples included vendor-supplied de-ionized water as a reference standard, and laboratory preparedphenol solutions as a positive control standard. Matrix effects were also studied. Networking with some experts in thisfield revealed that results were consistent with their findings.The Eclox kit was used in an event of an industrial spill of cyanide that caused a fish kill in one of the tributaries to oursource water. The fish kill occurred due to an accidental release of large quantities of potassium thiocyanate into awastewater treatment plant that discharges to the tributary. The affected water samples were analyzed from differentlocations of the source water using Eclox. The average percentage inhibition for the affected samples was 95.2% andthe unaffected water samples showed an average of 77.8%. The Eclox test was able to measure a difference ininhibition; however, the difference was marginal. Hence, the Eclox test alone could not serve as primary indicator ofwater quality contamination; however, it did prove to be useful for screening samples that might represent the water thathas been contaminated. Includes table, figures.