Provide PDF Format
B11 B11.0-2015
- Safety of Machinery
- standard by B11 Standards, Inc. (Formerly Listed as The Association for Manufacturing Technology), 08/25/2015
- Publisher: B11
$73.00$145.00
This Type-A standard applies to new, existing, modified or rebuilt power driven machines, not portable by hand while working, that are used to process materials by cutting; forming; pressure; electrical, thermal or optical techniques; lamination; or a combination of these processes. This includes associated equipment used to transfer material or tooling, including fixtures, to assemble/disassemble, to inspect or test, or to package. The associated equipment, including logic controller(s) and associated software or logic together with the machine actuators and sensors, are considered a part of the industrial machinery.
This can be a single machine or a machinery system(s).
Informative Note 1: To improve readability, the terms "machine," "machinery," "machine tool" or "machinery system(s)" are used interchangeably throughout the document, either in singular or plural form.
Informative Note 2: A machine system is a systematic array of one or more industrial machines that is not portable by hand while working and includes any associated material handling, manipulating, gauging, measuring, or inspecting equipment.
Informative Note 3: See ANSI B11.20 for additional information on integrated manufacturing systems.
This standard specifies basic terminology, principles and a methodology for achieving safety in the design and the use of machinery. It specifies principles of risk assessment and risk reduction to help designers, integrators and users of machinery in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given regarding the documentation and verification of the risk assessment and risk reduction process.
Other industry sectors may benefit from applying this standard. A risk assessment may be required to determine if a machine specific (Type-C) standard covers the hazards associated with the application of the machine covered by the Type-C standard.
Where a machine-specific (Type-C) standard exists, the requirements of the machine-specific (Type-C) standard shall generally apply. Deviations from the requirements of this standard or from any machine-specific (Type-C) standard shall be based on a documented risk assessment.
Informative Note 1: See clause 6 for additional information on risk assessment.
Informative Note 2: See 7.16 for a list of example machines covered by other specific standards.
This can be a single machine or a machinery system(s).
Informative Note 1: To improve readability, the terms "machine," "machinery," "machine tool" or "machinery system(s)" are used interchangeably throughout the document, either in singular or plural form.
Informative Note 2: A machine system is a systematic array of one or more industrial machines that is not portable by hand while working and includes any associated material handling, manipulating, gauging, measuring, or inspecting equipment.
Informative Note 3: See ANSI B11.20 for additional information on integrated manufacturing systems.
This standard specifies basic terminology, principles and a methodology for achieving safety in the design and the use of machinery. It specifies principles of risk assessment and risk reduction to help designers, integrators and users of machinery in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given regarding the documentation and verification of the risk assessment and risk reduction process.
Other industry sectors may benefit from applying this standard. A risk assessment may be required to determine if a machine specific (Type-C) standard covers the hazards associated with the application of the machine covered by the Type-C standard.
Where a machine-specific (Type-C) standard exists, the requirements of the machine-specific (Type-C) standard shall generally apply. Deviations from the requirements of this standard or from any machine-specific (Type-C) standard shall be based on a documented risk assessment.
Informative Note 1: See clause 6 for additional information on risk assessment.
Informative Note 2: See 7.16 for a list of example machines covered by other specific standards.
Related Products
B11 B11.21-2006 (R2012)
Safety Requirements for Machine Tools Using a Laser For Processing Materials..
$48.00 $95.00