Provide PDF Format
SAE AMS3678/9B
- Type 9, Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings
- standard by SAE International, 11/30/2010
- Publisher: SAE
$37.00$74.00
This specification covers a polytetrafluoroethylene (PTFE) resin filled with inorganic pigment in the form of extruded or molded rods or tubes which are sintered after molding. The blue colored material is designated for use in rod glands only and the yellow colored material is designated for use in piston glands only. The brown colored material is designated for use in AS5857 rod glands only and the green colored material is designated for use in AS5857 piston glands only.These products have been used as backup rings in AS4716 Glands for both static and dynamic applications and in AS5857 Glands for static stability up to 450 \mDF (232 \mDC) with good mechanical properties is required, but usage is need not be limited to such applications. Each application should be considered individually.
Related Products
SAE MAM4141B
Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Treated (Canc..
$37.00 $74.00
SAE AMS3267/1A
Sealing Compound, Low Adhesion, Corrosion Inhibiting, 200 to 600 Poises (20 to 60 Paâ s), 1/2 Hour ..
$37.00 $74.00
SAE AS22759/94
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, EXTRA HIG..
$37.00 $74.00