Provide PDF Format
SAE AMS3678C
- Polytetrafluoroethylene (PTFE) Moldings and Extrusions, Unfilled, Pigmented, and Filled
- standard by SAE International, 11/30/2010
- Publisher: SAE
$37.00$74.00
This specification covers several grades of virgin polytetrafluoroethylene (PTFE) resin which may be compounded with pigment and fillers in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.These products have been used typically for mechanical parts such as back-up rings, seals, and bearings requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
Related Products
SAE ARP5794
Centrifugal Aircraft Fuel Pump Requirements, Design and Testing, Aerospace Standard..
$37.00 $74.00
SAE AS 85049/51B
Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 90/mD, Self-Locking and Non-self..
$37.00 $74.00
SAE J2665_200610
Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method..
$37.00 $74.00
SAE J1606_201102
Headlamp Design Guidelines for Mature Drivers (Stabilized: Feb 2011)..
$37.00 $74.00