Provide PDF Format
SAE AMS4165H
- Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
- standard by SAE International, 08/05/2003
- Publisher: SAE
$37.00$74.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications.Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Related Products
SAE AS31471A
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J)..
$37.00 $74.00
SAE AMS5790D
Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade..
$37.00 $74.00
