Provide PDF Format
SAE AMS5629E
- Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
- standard by SAE International, 01/24/2002
- Publisher: SAE
$37.00$74.00
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extrusion. Primarily for parts requiring corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
Related Products
SAE AMS3892/8A
Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) T..
$37.00 $74.00
SAE EIA554A
Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM) (Stabilized: Jul ..
$37.00 $74.00
SAE AS81969/20
INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION A..
$37.00 $74.00
SAE AMS2643D
Structural Examination of Titanium Alloys, Chemical Etch Inspection Procedure..
$37.00 $74.00