Provide PDF Format
SAE AMS5637H
- Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength
- standard by SAE International, 07/25/2012
- Publisher: SAE
$37.00$74.00
This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.
Related Products
SAE AS39029/107B
Contacts, Electrical Connector, Pin, Crimp-Removable (For MIL-DTL-38999 Series I, III and IV, MIL-DT..
$37.00 $74.00
SAE AS9964A
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .625-18 UNJF-..
$37.00 $74.00
SAE AS9317B
Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .2500-28 U..
$37.00 $74.00