Provide PDF Format
SAE AMS5853C
- Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength
- standard by SAE International, 06/21/2006
- Publisher: SAE
$37.00$74.00
This specification covers a corrosion and heat resistant steel in the form of work-strengthened bars and wire 1-1/4 inches (31.8 mm) and under in nominal diameter or least distance between parallel sides.These bars and wire have been used typically for parts, such as fasteners, requiring room- temperature minimum tensile strength of 160 ksi (1103 MPa) after precipitation heat treatment for use up to 1000 \mDF (538 \mDC) and having oxidation resistance up to 1200 \mDF (649 \mDC), but usage is not limited to such applications.
Related Products
SAE AS3131A
Plug, Expansion - Cres, 303, Short; Std and .010 Oversize Diameters, UNS S30300..
$37.00 $74.00
SAE AS9599B
BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT (Stabilized: Feb 2014)..
$37.00 $74.00
SAE AIR4175A
A Guide to the Development of a Ground Station for Engine Condition Monitoring..
$37.00 $74.00