Provide PDF Format
SAE AMS5905B
- Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
- standard by SAE International, 10/31/2006
- Publisher: SAE
$37.00$74.00
This specification covers a corrosion-resistant steel in the form of sheet and strip.These products have been used typically in aircraft structural components requiring moderate forming and bending during fabrication and where corrosion resistant up to 800 \mDF (427 \mDC) is required, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked production should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
Related Products
SAE ARP1350A
Procedure for Installation and Mounting of Single Hole Mount, Cylindrical, Electrical Connectors (Fo..
$37.00 $74.00
SAE AS81807A
Marking of Aircraft Ground Support Equipment and Other Flight Line Vehicles With Retro-Reflective Ma..
$37.00 $74.00
SAE J3067_201408
Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2..
$37.00 $74.00
