Provide PDF Format
SAE AMS5934
- Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation-Hardenable
- standard by SAE International, 07/22/2004
- Publisher: SAE
$37.00$74.00
This specification covers an extra high toughness, corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extrusion.These products have been used typically for parts requiring extra high toughness, corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
Related Products
SAE J1922_201108
Powertrain Control Interface for Electronic Controls Used in Medium- and Heavy-Duty Diesel On-Highwa..
$37.00 $74.00
SAE AMS4210K
Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated..
$37.00 $74.00
