Provide PDF Format
SAE AMS6484D
- Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered
- standard by SAE International, 07/03/2012
- Publisher: SAE
$37.00$74.00
This specification covers an aircraft-quality, low-alloy steel in the form of bars, fogings, mechanical tubing, and forging stock.These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
Related Products
SAE AMST81914/1A
Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions (Cancelled: Ma..
$37.00 $74.00
SAE AS5692/4
ARC FAULT CIRCUIT BREAKER â AIRCRAFT, TRIP FREE, 25 TO 35 AMP, TYPE 1..
$37.00 $74.00
SAE J2683_200506
Refrigerant Purity and Container Requirement for Carbon Dioxide (CoD2 R-744) Used in Mobile Air-Cond..
$37.00 $74.00
SAE AMS5628F
Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 16Cr - 2.5Ni (SAE 51431)..
$37.00 $74.00