• SAE J1947_200210
Provide PDF Format

Learn More

SAE J1947_200210

  • O.D. Coatings for Radial Lip-Type Shaft Seals (Cancelled: Oct 2002)
  • standard by SAE International, 10/25/2002
  • Publisher: SAE

$37.00$74.00


This SAE Information Report covers thin coatings of resinous based materials that can be placed on the metallic outer diameter of radial lip-type shaft seals to provide sealing when the mating bore finish is too rough to insure a proper seal (typically when finish exceeds 2.54 \gm r\da, or in pressurized applications).

The coatings will have the following characteristics: a.) material shall dry to a tough, flexible, and non-tacky film; b.) thickness typically ranges from 0.005 to 0.076 mm; c.) It shall not crack, flake or powder when scraped; d.) Coating shall adhere to seal case as noted in text; and e.) The sealer shall not show any evidence of peeling, blistering, softening or dissolution when tested in media to be sealed.

Related Products

SAE AIR4289A

SAE AIR4289A

Handbook for the SAE AS4075 High Speed Ring Bus Standard (Stabilized: May 2012)..

$37.00 $74.00

SAE AMS6518C

SAE AMS6518C

Steel Sheet, Strip, and Plate, Maraging, 19ni 3.0mo 1.4ti 0.10al Double Vacuum Melted, Solution Heat..

$37.00 $74.00

SAE J 1309

SAE J 1309

Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Kn..

$37.00 $74.00

SAE J1149_201510

SAE J1149_201510

Metallic Air Brake System Tubing and Pipe (Stabilized: Oct 2015)..

$37.00 $74.00