• SAE J2028_200511
Provide PDF Format

Learn More

SAE J2028_200511

  • Front-Wheel-Drive Constant Velocity Joint Boot Seals
  • standard by SAE International, 11/21/2005
  • Publisher: SAE

$37.00$74.00


This SAE Recommended Practice outlines qualification testing and performance related criteria of elastomeric boot seals used in constant velocity joint applications. These applications are referred to as front-wheel-drive halfshafts or axles, but can also be utilized in rear-wheel-drive halfshaft applications. For additional information regarding CV joint systems and their applications refer to SAE AE-7 "Universal Joint and Driveshaft Design Manual."

The grease type and grease quantities, clamps and clamping mechanisms of an assemby are critical and considered to be the same as OEM, service, or aftermarket designation. Although joint lubricating grease and clamping mechanism are not addressed in this document, they are critical to a total system performance.

The purpose of this document is to establish a uniform practice for those in the surface vehicle industry that specify and/or manufacture CV joint boot seals (boots) for OEM or aftermarket use with respect to qualification testing for physical and mechanical properties.

This document is not intended to include or address propeller shaft, Power Take Off, heavy equipment, and marine boot seal applications.

Related Products

SAE AS5452A

SAE AS5452A

Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft..

$37.00 $74.00

SAE ARP5945

SAE ARP5945

Endurance Time Tests for Aircraft Deicing/Anti-icing Fluids SAE Type I..

$37.00 $74.00

SAE AMS5027E

SAE AMS5027E

Steel, Welding Wire 1.05Cr 0.55Ni 1.0Mo 0.08V (0.26 0.32C), Vacuum Melted, Environment-Controlled Pa..

$37.00 $74.00

SAE J2140_200509

SAE J2140_200509

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines..

$37.00 $74.00