Provide PDF Format
SSPC SP 15
- Commercial Grade Power Tool Cleaning
- standard by Society for Protective Coatings, 11/11/2013
- Publisher: SSPC
$13.00$25.00
This standard covers the requirements for power tool cleaning to provide a commercial grade power tool cleaned steel surface, and to retain or produce a minimum 25 micrometer (1.0 mil) surface profile.
A commercial grade power tool cleaned steel surface, when viewed without magnification, shall be free of all visible oil, grease, dirt, rust, coating, oxides, mill scale, corrosion products, and other foreign matter, except as noted.
Random staining shall be limited to no more than 33 percent of each unit area of surface as defined. Staining may consist of light shadows, slight streaks, or minor discolorations caused by stains of rust, stains of mill scale, or stains of previously applied coating. Slight residues of rust and paint may also be left in the bottoms of pits if the original surface is pitted. This standard differs from SSPC-SP 3 and SSPC-SP11.
A commercial grade power tool cleaned steel surface, when viewed without magnification, shall be free of all visible oil, grease, dirt, rust, coating, oxides, mill scale, corrosion products, and other foreign matter, except as noted.
Random staining shall be limited to no more than 33 percent of each unit area of surface as defined. Staining may consist of light shadows, slight streaks, or minor discolorations caused by stains of rust, stains of mill scale, or stains of previously applied coating. Slight residues of rust and paint may also be left in the bottoms of pits if the original surface is pitted. This standard differs from SSPC-SP 3 and SSPC-SP11.
Related Products
SSPC PMBSET
SSPC Steel Structures Painting Manual, Volume 1 and Volume 2 Set Hardcover/Binder Set..
$215.00 $430.00
SSPC SP 2
Surface Preparation Specification No. 2: Hand Tool Cleaning, Includes Editorial Revisions (2004)..
$13.00 $25.00
SSPC SP WJ-1/NACE WJ-1
Joint Surface Preparation Standard - Waterjet Cleaning of Metals - Clean To Bare Substrate..
$13.00 $25.00
SSPC SP 12/NACE No. 5
Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating..
$13.00 $25.00