Provide PDF Format
TAPPI T 546 om-10
- Machine Direction Grammage Variation Measurement (Gravimetric Method)
- standard by Technical Association of the Pulp and Paper Industry, 01/01/2010
- Publisher: TAPPI
$37.00$73.00
1.1 This method describes a procedure which can be applied to determine the short term machine directionvariation in mass per unit area. These variations can be caused by defects in the stock approach system, headbox, or consistency control. This test method is not intended to identify the source of the variations, but rather to quantify them. The method has particular application to acceptance testing of both the papermaking process and the product.
1.2 This test is laborious, but it is reliable and accurate. It requires cutting out samples, weighing samples,and data evaluation.
1.3 The general procedures outlined in TAPPI T 410 "Grammage of Paper and Paperboard (Weight per Unit Area)" and in TAPPI T 402 "Standard Conditioning and Testing Atmospheres for Paper, Board, Pulp Handsheets, and Related Products," are used as basic references for this method. TAPPI T 545 "Cross-Machine Grammage Profile Measurement (Gravimetric Method)" is the counterpart to this method for the cross-machine evaluation.
1.2 This test is laborious, but it is reliable and accurate. It requires cutting out samples, weighing samples,and data evaluation.
1.3 The general procedures outlined in TAPPI T 410 "Grammage of Paper and Paperboard (Weight per Unit Area)" and in TAPPI T 402 "Standard Conditioning and Testing Atmospheres for Paper, Board, Pulp Handsheets, and Related Products," are used as basic references for this method. TAPPI T 545 "Cross-Machine Grammage Profile Measurement (Gravimetric Method)" is the counterpart to this method for the cross-machine evaluation.
Related Products
TAPPI T 1211 sp-11
Acceptance Procedures for Calibration Laboratories Providing Reference Materials for TAPPI Standards..
$25.00 $49.00
TAPPI T557
Water Vapor Transmission Rate Through Plastic Film and sheeting Using a Modulated Infrared Sensor..
$25.00 $49.00
TAPPI T815
Coefficient of Static Friction (Slide Angle) of Packaging and Packaging Materials (Including Shippin..
$45.00 $90.00