Provide PDF Format
TAPPI T810 om-06
- Bursting Strength of Corrugated and Solid Fiberboard
- standard by Technical Association of the Pulp and Paper Industry, 01/27/2006
- Publisher: TAPPI
$63.00$126.00
This method describes a procedure for measuring the bursting strength of single wall and double wallcorrugated and solid fiberboard within the range of 690 kPa (100 psi) to 4825 kPa (700 psi) employing a disk shaped, molded diaphragm type instrument.
A specimen of board is clamped between two platens with circular opening in their centers. The lowerplaten is fixed; the upper platen has an adjustable depth but remains stationary for the duration of the test. An expansible diaphragm is distended through the lower platen by means of hydraulic pressure until the specimen bursts. The maximum hydraulic pressure when the specimen ruptures, is recorded.
For the bursting strength of paper, see TAPPI T 403 "Bursting Strength of Paper," and for that ofpaperboard and linerboard, see TAPPI T 807 "Bursting Strength of Paperboard and Linerboard." This method is not applicable for triple wall corrugated board.
A specimen of board is clamped between two platens with circular opening in their centers. The lowerplaten is fixed; the upper platen has an adjustable depth but remains stationary for the duration of the test. An expansible diaphragm is distended through the lower platen by means of hydraulic pressure until the specimen bursts. The maximum hydraulic pressure when the specimen ruptures, is recorded.
For the bursting strength of paper, see TAPPI T 403 "Bursting Strength of Paper," and for that ofpaperboard and linerboard, see TAPPI T 807 "Bursting Strength of Paperboard and Linerboard." This method is not applicable for triple wall corrugated board.
Related Products
TAPPI T 815 om-12
Coefficient of Static Friction (Slide Angle) of Packaging and Packaging Materials (Including Shippin..
$25.00 $49.00
TAPPI TIP0602-03
Calibration Techinique for the Drum Style Chip Thickness Classifier..
$25.00 $49.00