Provide PDF Format
TAPPI TIP0304-20
- Calibration of Flexible Beam Crush Tester
- standard by Technical Association of the Pulp and Paper Industry, 01/01/2004
- Publisher: TAPPI
$54.00$107.00
The flexible beam type crush tester is commonly used when performing a number of different types oflaboratory and production quality tests. Among the procedures performed on the tester are edge crush, flat crush,ring crush, CONCORA Medium Test, CONCORA Liner Test and pin adhesion tests.
The flexible beam tester most commonly used to perform these tests consists of an upper platen driven downat a constant speed onto a specimen placed on a lower platen. The lower platen is centrally mounted on a flexiblebending beam. The deflection of the flexible beam depresses a plunger mounted to a dial indicator or an electronicload cell. The dial indicator or load cell is designed to read the force required to crush or separate the specimenbeing tested.
The flexible beam tester most commonly used to perform these tests consists of an upper platen driven downat a constant speed onto a specimen placed on a lower platen. The lower platen is centrally mounted on a flexiblebending beam. The deflection of the flexible beam depresses a plunger mounted to a dial indicator or an electronicload cell. The dial indicator or load cell is designed to read the force required to crush or separate the specimenbeing tested.
Related Products
TAPPI TIP0402-20
GTAW Root Pass Welding of 6% Molybdenum Austenitic Stainless Steel Pipe - - Open Root Joint with Han..
$25.00 $49.00
TAPPI TIP 0416-08
Guidelines for replacement of generating bank tubes with expanded joints in two-drum boilers..
$25.00 $49.00
